Do you offer free estimates?

Yes. Oklahoma Paving Repair & Maintenance provides free, no-pressure estimates for all residential and commercial asphalt projects throughout the Tulsa metro area. Call (918) 899-8355 or submit a request online and we will get back to you promptly.

What areas do you serve?

We serve Tulsa and the surrounding communities including Broken Arrow, Owasso, Bixby, Jenks, Sand Springs, Sapulpa, Collinsville, Claremore, Catoosa, and Coweta. If you are in the greater Tulsa metro area, we can help.

Are you licensed and insured?

Yes. Oklahoma Paving Repair & Maintenance is fully licensed and insured to operate as an asphalt contractor in Oklahoma. We carry general liability insurance and workers compensation coverage on every job, protecting both our crew and your property.

What signs indicate I need asphalt repair?

Common signs include cracks wider than a quarter inch, potholes, alligator cracking (interconnected crack patterns), surface raveling or aggregate loss, drainage pooling on the surface, and significant fading or oxidation. The sooner you address these issues, the less expensive the repair.

How much does asphalt crack filling cost in Tulsa?

Crack filling costs vary based on the total linear footage of cracks and their severity. For most residential driveways, crack filling is a low-cost repair that pays for itself many times over by preventing water infiltration and base damage. We provide free estimates so you know exactly what to expect.

How long does asphalt crack filler last?

Quality crack filler applied to clean, dry cracks typically lasts 3 to 5 years before needing reapplication. The lifespan depends on crack width, Oklahoma weather conditions, and traffic levels. Combining crack filling with sealcoating extends both treatments.

What is asphalt sealcoating and why does it matter?

Sealcoating is a protective liquid coating applied to asphalt surfaces. It blocks UV radiation, water penetration, and fuel spills that break down asphalt binder over time. In Oklahoma's climate, sealcoating every 3 to 5 years can double the lifespan of an asphalt surface.

How much does sealcoating cost in Tulsa?

Asphalt sealcoating in the Tulsa area typically costs between $0.15 and $0.35 per square foot depending on surface size, condition, and product type. A standard residential driveway runs between $150 and $400. Commercial parking lots are priced by the square foot with volume discounts.

How often should I sealcoat my asphalt in Oklahoma?

We recommend sealcoating every 3 to 5 years for both residential driveways and commercial parking lots in Oklahoma. The first sealcoat should be applied 6 to 12 months after new asphalt is installed, once the surface has fully cured.

What is the best time of year to sealcoat in Oklahoma?

The ideal sealcoating window in Oklahoma is late spring through early fall, when temperatures are consistently above 50 degrees Fahrenheit and rain is not in the forecast for 24 to 48 hours. Summer is peak season, but scheduling in spring or fall often means faster availability.

Does sealcoating fix cracks in my asphalt?

No. Sealcoating is a surface treatment that protects asphalt but does not fill or repair cracks. Cracks should be filled and sealed before sealcoating is applied. Applying sealcoat over open cracks seals moisture inside and accelerates damage.

How long does parking lot line striping last?

Parking lot striping typically lasts 1 to 3 years depending on traffic volume, sun exposure, and whether the surface was sealcoated first. High-traffic areas near entrances and drive lanes fade faster. Restriping on a freshly sealed surface significantly extends marking lifespan.

How long does parking lot striping take?

Most parking lot striping projects are completed in a few hours. Paint dries in 30 to 60 minutes under normal conditions, so your lot can typically reopen the same day. We work efficiently to minimize disruption to your business.

Is parking lot signage required by law?

Yes, for accessible parking spaces. ADA regulations require post-mounted signs with the International Symbol of Accessibility for each accessible space, mounted at least 60 inches above the ground. Van-accessible spaces require additional signage. Ground-painted symbols alone do not satisfy ADA requirements.

How much does a new asphalt driveway cost in Tulsa?

Most residential asphalt driveways in the Tulsa area cost between $3 and $7 per square foot installed, with average total project costs ranging from $2,500 to $8,000 depending on size, site conditions, and whether demolition of an existing driveway is needed.

When should I repair vs. resurface vs. replace my asphalt?

Repair (crack filling, pothole patching) is appropriate when damage is localized and the base is sound. Resurfacing works when surface wear is widespread but the base is still intact. Full replacement is needed when alligator cracking, base failure, or serious drainage problems are present.

How many ADA parking spaces does my Tulsa business need?

The number depends on your total lot size. A lot with 1 to 25 spaces requires 1 accessible space; 26 to 50 requires 2; 51 to 75 requires 3; 76 to 100 requires 4. For lots with 501 to 1000 spaces, 2 percent must be accessible. At least one in every six accessible spaces must be van-accessible.

Does repaving my parking lot trigger ADA compliance requirements?

Yes. When you resurface or repave a parking lot, the altered areas must be brought into ADA compliance. This includes updating accessible space counts, dimensions, van-accessible spaces, signage, and curb ramps. Routine sealcoating generally does not trigger these requirements, but mill-and-overlay or full repaving does.

Can you widen my existing driveway?

Yes. Driveway widening is one of our most common residential projects. We can extend your driveway on one or both sides, add a parking pad for an RV or boat, or build a turnaround. We match the existing surface material and finish for a clean, uniform appearance.

Should I choose asphalt or concrete for my driveway?

Asphalt costs less upfront, installs faster, and is easier to repair. It is flexible, which helps it handle Oklahoma's freeze-thaw cycles. Concrete lasts longer, requires less ongoing maintenance, and offers more decorative finish options. Both are excellent choices in Oklahoma. We can help you evaluate the right option for your property and budget during a free estimate.

How Long Does an Asphalt Driveway Last in Bixby, OK?

February 26, 2026

How Long Does an Asphalt Driveway Last in Bixby, OK?

Bixby homeowners often ask: how long should my asphalt driveway really last? The answer depends on how it’s built and how it’s maintained — but a well-installed Bixby driveway should last 20–30 years.

Average Asphalt Driveway Lifespan in Oklahoma

Maintenance Level	Expected Lifespan	Cost Over 25 Years
No maintenance	10–15 years	Full replacement every 12 yrs ≈ $8,000+
Occasional sealcoating	15–20 years	Moderate — some repair costs
Regular sealcoating + crack filling	25–30 years	Lowest long-term cost

What Shortens Driveway Life in Bixby?

Thin installation — Driveways paved under 2″ thick fail faster under vehicle weight
Poor base preparation — Bixby’s clay-heavy soil expands and contracts; without proper base gravel, pavement heaves and cracks
Ignored cracks — Water enters cracks, erodes the base, and causes structural failure
No sealcoating — UV rays and rain oxidize and dry out asphalt in 5–7 years without sealing
Heavy vehicles — RVs, dump trucks, and heavy equipment can damage driveways not rated for their weight