Crack Filling and Asphalt Repair in Tulsa, OK
Professional crack filling and asphalt repair for driveways and parking lots in Tulsa and Tulsa County. Oklahoma PRM stops water infiltration before freeze-thaw cycles turn small cracks into major failures. Free estimates — call (918) 899-8355.
Why Crack Filling Matters in Tulsa
Cracks in asphalt are more than cosmetic. Every crack is an open path for water to reach the aggregate base beneath your driveway or parking lot. In Tulsa, Tulsa County’s clay-heavy soils absorbs and releases moisture seasonally — and water that freezes inside a crack expands with enough force to widen it by 30–50% in a single winter.
A crack filling job that costs $150–$400 today prevents a structural repair or overlay that costs $1,500–$5,000 in two to three years. It’s the highest-return maintenance you can do for existing asphalt.
Types of Cracks We Treat
- Longitudinal cracks — Run parallel to the direction of paving; often from pavement edge curling
- Transverse cracks — Run perpendicular; common from thermal contraction in Oklahoma winters
- Edge cracks — Along the driveway perimeter where asphalt meets unpaved surfaces
- Reflective cracks — Surface cracks reflecting movement from joints or cracks in the base layer
- Random shrinkage cracks — Network of surface cracks from oxidation and asphalt binder shrinkage
Our Crack Filling Process in Tulsa
- Crack cleaning — Debris, vegetation, and loose material are removed from cracks using compressed air and wire tooling
- Routing (for wide cracks) — Larger cracks are routed to create a clean reservoir for the filler
- Hot-pour application — Rubberized hot-pour crack filler is heated and injected into the crack, overfilling slightly
- Squeegee finishing — Excess material is squeegeed flush with the surface
- Sand broadcast — Fine sand is broadcast over fresh filler to prevent tracking
We use commercial-grade hot-pour rubberized filler — not cold-applied caulk or consumer-grade products. Hot-pour filler flexes with the pavement through Oklahoma’s temperature swings and lasts 3–7 years compared to 1–2 years for cold-applied products.
Crack filling can be done independently or as part of a sealcoating prep — cracks should always be filled and allowed to cure before sealcoating.
Crack Filling Cost in Tulsa: What to Expect
Crack filling in Tulsa is typically priced by the linear foot of crack. Hot-pour rubberized filler runs $0.50–$2.00 per linear foot depending on crack width, depth, and site conditions. Most residential driveways with moderate cracking run $150–$400 total for crack filling. Commercial parking lots are estimated based on a site assessment.
When Crack Filling Isn’t Enough
Crack filling works on isolated, non-structural cracks. It’s not appropriate for alligator cracking (the interconnected web pattern that signals base failure), cracks wider than 1.5 inches, or situations where the surface has lost more than 30% of its integrity. In those cases, we’ll recommend patching, an overlay, or replacement — whichever is the most cost-effective fix.
Free Crack Filling Estimate in Tulsa
Oklahoma PRM serves Tulsa and Tulsa County. We measure crack linear footage, assess severity, and provide a written quote — free, no obligation. Call (918) 899-8355 or request online.